16
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC
Stopper L88
Hammer, White key
Slit
Frame
Hook
Frame
Key spring
Upside
[E]
[F]
White key
Key guide
Key spring
(Fig. 33)
(Fig. 34)
(Fig. 32)
19
Assembling the GH Keyboard
19-A Hammer of White key (Black) Key
Place the GH keyboard assembly upside down,
insert a hammer assembly into the frame, and put
the stopper L88 on. (See Fig. 32)
*
There are four kinds of hammers that differ in
weight.
19-B Key Spring
Place the GH keyboard assembly rightside up, and
fix a key spring to the frame by setting it at the slit
and pushing it down once.
(See Fig. 33)
*
Be careful of the direction of the spring.
19-C White (Black) Key
After a key has been fit to part [F] and the key
guide, make sure that the spring is fixed to the key.
Then press part [E] of the key down.
(See Fig. 34)
19-D AEXL88-L circuit board.
Tighten the seven [7] screws marked [260A] to fix
the AEXL88-L circuit board.
(See Fig. 27)
19-E AEXL88-H circuit board.
Tighten the seven [7] screws marked [260B] to fix
the AEXL88-H circuit boaed. (See Fig. 27)
*
Set the slits of the rubber contact at the markes on
the frame.