30
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC
31
031: Green LED On
Check that all panel Green LEDs are lit.
Executes the test and check that all panel Green LEDs are lit.
32
032: ALL LCD On
Check that all LCD dots are lit.
Executes the test and check that all LCD dots are lit.
33
033: ALL LCD Off
Check that all LCD dots are turned off.
Executes the test and check that all LCD dots are turned off.
34
034: Soft PedalChk
Check that C4 is output when pushing the pedal and C3 is output when releasing the pedal.
35
035: SostenutePedalChk
Check that C4 is output when pushing the pedal and C3 is output when releasing the pedal.
36
036: DamperPedalChk
Check that C4 is output when maxmum pushing the pedal and C3 is output when
releasing the pedal.
37
037: Exp Pedal Chk
Checks the Expression Pedal.
Connect the frequency counter to the pedal. Push gradually the pedal from MIN to
MAX, C3 is output when detecting that frequency is MIN and then C4 is output when
the pedal functions normally.
38
038: MIDI Chk
After connecting the MIDI IN and MIDI OUT, execute the test. The test result appears
on the LED display.
39
039: To Host Chk
Connect pin 1 to pin 2, pin 3 to pin 5, and pin 6 to pin 8 on the TO HOST terminal, and
execute the test.
Check that the following notes are output when changing the HOST SELECT switch
position according to the LED indication, and that the LED displays “OK”.
Mac position : C5, PC-2 position : C4, PC-1 position : C3
40
040: MainRomChk2
For factory test use only.
41
041: SubRomChk2
For factory test use only.
42
042: MainRamChk2
For factory test use only.
43
043: SubRamChk2
For factory test use only.
44
044: FlashRomChk2
For factory test use only.
45
045: WaveRomChk2
For factory test use only.
46
046: Factory Set
Executes the test to erase all the contents of the Frash ROM.
47
048: Test Exit
Exit from the test program when executing this test.
NOTE: 0 dBm = 0.775 V
NOTE: Model equipped with “A” has no floppy disk drive.