42
CLP-970
Set the tempo in Step 3.
See page 49 for more infor-
mation on recording in Dual/
Split mode.
2.
Select a voice.
Select a voice (or voices) for recording (see page 30).
Set the other parameters, such as reverb and chorus.
Adjust the [MASTER VOLUME] slider to set the volume level to suit
your preference. You can also use the slider to adjust the level during
playback.
After you set the tempo or if the record standby screen does not
appear, press one of the SONG SELECT [
] [
] buttons once to
return to the New Song screen.
3.
Enter record mode and select a recording track.
Press and hold down the [REC] button and press the
[TRACK 1] button.
The [TRACK 1] indicator flashes in red. (To cancel recording, press
the [REC] or [STOP] button.)
Set the tempo, if necessary.
If this record standby screen does not appear, press one of the SONG
SELECT [
] [
] buttons once.
You can record data while
using the metronome. The
metronome is not recorded.
When you press the
[START/PAUSE] button dur-
ing recording, recording is
paused. To resume record-
ing, press the [START/
PAUSE] button again or play
a note on the keyboard.
4.
Start and stop recording.
Recording begins automatically as soon as you play a
note on the keyboard.
(Optional) Press the [START/PAUSE] button to start recording.
The recording screen displays the current measure number.
When you press the [REC]
button, recording pauses.
To stop recording, press the [STOP] button. The Clavinova
locates the top of the song.
The [TRACK 1] indicator lights up in green. (Record mode is auto-
matically cancelled.)
NOTE
NOTE
Record standby screen
A
B
C
D
NO
YES
TIP
TIP
A
B
C
D
NO
YES
Measure number in recording
Record screen
TIP
Summary of Contents for Clavinova CLP-970
Page 21: ...21 CLP 970 Basic Operation CLP 970 21 ...
Page 68: ...68 CLP 970 ...
Page 69: ...CLP 970 69 Detailed Settings CLP 970 69 ...
