Yamaha Clavinova CVP-103M Owner'S Manual Download

Page: 166 / 178

166

CVP-103

An error occurred while writing to (as in recording or storing files) or reading from the disk.

➾

Try the operation again after pressing the

button. If the error occurs a second

time, the disk or the disk drive unit may be faulty. If you suspect the drive to be at
fault, refer the problem to your Yamaha dealer.

This message appears when you attempt to record over parts or perform other operations
on song files that are incompatible or do not allow such operations. Depending on the
song file type, operations such as additional recording, copying, deleting, etc. may not be
possible using the CVP-103.

This appears for a few seconds when a time-consuming operation such as Format, Song
Copy, etc., is finished.

This message is displayed while data is being transferred between the Clavinova and the
disk.

➾

The message disappears automatically when the operation is finished.

When operations such as Song Delete or Format are selected, this prompts you to confirm
whether you want to go ahead with the operation or not.

➾

Press

YES

to execute the operation. Press

to return to the previous display.

The currently loaded disk is full and cannot hold any more data.

➾

Press the

button, then delete any unnecessary data in the disk (page 144), or

use a disk that has more available space. If this message appears during song
recording, recording will stop and any data recorded up to that point will be saved
automatically.

This message appears when you try to create more files than the disk is capable of stor-
ing. You can record up to 60 song files on a 2DD or 2HD disk. A 2DD disk can hold about
107 files (of various types), and a 2HD disk can hold up to about 219 files.

➾

Press the

button, then delete any unnecessary files from the disk (page 144),

or use a disk that has more available space.

A file with the same name already exists.

➾

Press the

button if you wish to overwrite the original file with new data, or press

CANCEL

to abort the operation.

This message appears when you try to execute other operations while reading data from
the disk or saving data.

➾

Wait until the data read/write operation is completed, then perform the operation
again.

●

General (Memory-related)

This message appears when the Clavinova’s memory has become full while recording a
song in the internal memory (page 133). If this happens, recording will stop and any data
recorded up to that point will be saved automatically.
This message is also displayed if the Clavinova’s memory becomes full when recording
data in a custom style (see page 84).

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Messages

164

This message appears when you attempt to record over or edit the data of commercially
available software or data recorded on instruments other than the CVP-109/107/105/103
or the CVP-94/92/98/96/600.

➾

Press

YES

to convert the data for recording or editing on the CVP-109/107/105/

103. Press

if you don’t want to convert the data.

It may not be possible to record to tracks other than tracks 1 and 2 of songs con-
verted in this manner.

This message appears while the Clavinova is storing the data of a song recorded to the
internal memory after it has been edited using the Track Edit or Initial Edit functions.

➾

Complete the data write operation, then perform the other operation.