Making Global and Other Important Settings — Function
141
CVP-205/203
Parameter Lock
This function is used to “lock” the specified parameters so that they can only be changed directly via the panel controls
— in other words, instead of via Registration Memory, One Touch Setting, Music Finder, or song and sequence data.
Tap Count
This lets you change settings of the tap sound, used for the Tap Start function (page 52).
Making Settings for the Display, Speaker System, and Voice Number
Indication — CONFIG 2
Selects the desired
parameter for locking/
unlocking.
Determines whether the selected
parameter is locked (checkmarked)
or unlocked (empty).
Determines the level of the tap
sound.
Determines the particular sound
used for the Tap Start function.
Any drum or percussion sound
in the Standard Kit (page 56)
can be selected.
Determines the brightness of
the backlit display.
Determines whether or not the voice bank
and number are shown in the PRESET
page of the VOICE display (page 55). This is
useful when you want to check the proper
bank select MSB/LSB values and program
number to specify when selecting the voice
from an external MIDI device.
HEADPHONE SW (SWITCH)
Speaker sounds normally, but is cut off
when headphones are inserted to the
PHONES jack.
ON
Speaker sound is always on.
OFF
Speaker sound is off.
Summary of Contents for Clavinova CVP-203
Page 1: ...OWNER S MANUAL OWNER S MANUAL CVP 205 205M 203 CVP 205 205M 203...
Page 168: ......