Yamaha Clavinova CVP-307 Owner'S Manual Download

Page: 172 / 224

Connecting the Cla

vino

va Directly to the Internet

Operations in the Special Clavinova Website

CVP-309/307 Owner’s Manual

172

Following Links

When there is a link in the page, it is shown as a button or in colored text, etc. To
select the link, press the [6

†

]/[7

π†

]/[8

†

] buttons. Press the [8

] (ENTER) but-

ton to actually call up the link destination.

You can also select and call up links by using the [DATA ENTRY] dial and pressing
the [ENTER] button.

Entering Characters

This section explains how to enter characters within the website, for inputting a
password or searching for data, etc.

With the cursor at a field for character entry (such as a password box,
or other field; see “Following Links” above), press the [ENTER] button
to call up the character input display.

Select the desired character type by pressing the [A]/[B] buttons.

Use the [6

†

]/[7

π†

†

]/[8

†

] buttons to move the red highlight to the

desired character.

You can also use the [DATA ENTRY] dial to move the red highlight to the
desired position.

Summary of Contents for Clavinova CVP-307

































































































































































































































Search results

Summary of Contents for Clavinova CVP-307

Reviews:

Related manuals for Clavinova CVP-307

Brands by name

Popular brands

Yamaha Clavinova CVP-307, Owner'S Manual

Search results

Summary of Contents for Clavinova CVP-307

Reviews:

Related manuals for Clavinova CVP-307

Brands by name

Popular brands