Basic Oper
ation
Basic Displays (Main Display and File Selection Display)
CVP-405/403/401 Owner’s Manual
65
Basic Displays (Main Display and File
Selection Display)
There are two basic display types – Main and Selection. Here are explanations of
each display segment and its basic operation.
Main Display
The Main display shows the current basic settings of the instrument such as the cur-
rently selected Voice and Style, allowing you to see them at a single glance. The
Main display is the one you’ll usually see when you play the keyboard.
1
Voice name
• RIGHT 1 (indicated at the right edge):
Voice name currently selected for the RIGHT 1 part (page 80).
• RIGHT 2 (indicated at the right edge):
Voice name currently selected for the RIGHT 2 part (page 80).
• LEFT (indicated at the right edge):
Voice name currently selected for the LEFT part (page 80).
When the Left Hold function is ON, an “H” indication appears (page 85). Pressing one of
the [A]–[C] and [F]–[H] buttons calls up the Voice Selection display for each part (page 32).
On the CVP-401, one of the [A]–[B] and [F]–[I] buttons calls up the Voice Selection display
for each part (page 32).
2
Style name and related information
Displays the currently selected Style name, time signature and tempo. On the CVP-405/
403, pressing the [D] button calls up the Style Selection display (page 46). On the CVP-
401, open the Style Selection display by pressing the [1
π†
]–[4
π†
] buttons.
3
Current chord name
If the [ACMP ON/OFF] button is set to On, the chord specified in the chord section of the
keyboard will be displayed.
4
Song name and related information
Displays the currently selected Song name, time signature and tempo. On the CVP-405/
403, pressing the [I] button calls up the Style Selection display (page 46). On the CVP-
401, open the Style Selection display by pressing the [5
π†
]–[8
π†
] buttons.
If the Song contains the chord data, the current chord name will be displayed in the “CHORD”
segment (see
3
above). Pressing the [I] button calls up the Song Selection display (page 35).
5
Registration Memory Bank name
Displays the currently selected Registration Memory Bank name.
Pressing the [J] button calls up the Registration Memory Bank Selection display (page 128).
When the Freeze function is ON, an “F” indication appears (page 129).
6
Volume Balance
Displays the volume balance among the parts. On the CVP-401, open the volume bal-
ance display by pressing the [C] button.
Adjust the volume balance among the parts by using the [1
π†
]–[8
π†
] buttons.
7
Transpose
Displays the amount of transposition in semitone units (page 56).
Returning to the Main display
Here’s a convenient way to
return to the Main display from
any other display: Simply press
the [DIRECT ACCESS] button,
then the [EXIT] button.
1
5
6
7
8
!
)
2
3
4
1
5
4
7
8
2
3
9
9
!
6
CVP-405/403
CVP-401
