manualshive.com logo in svg

Yamaha Clavinova CVP-403, Owner'S Manual

The Yamaha Clavinova CVP-403 is an exceptional digital piano that offers a wide range of features and high-quality sound. With its user-friendly interface, navigating through various functions is a breeze. You can easily download the free user manual for the CVP-403 from 88.208.23.73:8080, ensuring a smooth and hassle-free experience with your instrument.

Share
Download
background image

Using 

Your Instrument with Other Devices

CVP-405/403/401 Owner’s Manual

199

MIDI Settings

n

When different parts are assigned to the same transmit channel 

If the same transmit channel is assigned to several different parts, 
the transmitted MIDI messages are merged to a single channel—
resulting in unexpected sounds and possible glitches in the con-
nected MIDI device.

n

About the protected Songs

Write-protected Songs cannot be transmitted even if the proper 
Song channels 1–16 are set to be transmitted.

■

MIDI messages which can be transmitted or 
received (recognized)

The following MIDI messages can be set on the TRANS-
MIT/RECEIVE display.
• Note (Note events).......................................page 160
• CC (CONTROL CHANGE) ..........................page 160
• PC (PROGRAM CHANGE)...........................page 160
• PB (Pitch Bend)............................................page 160
• AT (Aftertouch).............................................page 160

MIDI Receive Settings

The explanations here apply to the RECEIVE display to be 
called up in step 4 of the “Basic Operation” on page 196. 
This determines which parts will receive MIDI data and 
over which MIDI channels the data will be received.

Operation

Select the channel to be received and the part via which 
the selected channel will be received. You can also 
determine the types of data to be received.

●

The instrument can receive MIDI messages over 
32 channels (16 channels x 2 ports) by USB con-
nection.

●

With the exception of the two parts below, the 
configuration of the parts is the same as those 
already explained elsewhere in this manual.

• KEYBOARD

The received note messages control the instrument’s 
keyboard performance.

• EXTRA PART 1–5

There are five parts specially reserved for receiving 
and playing MIDI data. Normally, these parts are not 
used by the instrument itself. The instrument can be 
used as a 32-channel multi-timbral tone generator by 
using these five parts in addition to the general parts 
(except for the microphone sound).

●

Rx MONITOR

The dots corresponding to each channel (1–16) flash 
briefly whenever any data is received on the channel(s).

n

Parameter Lock

You can “lock” specific parameters (e.g., effect, split 
point, etc.) to make them selectable only via the panel 
controls (page 128).

■

MIDI transmission/reception via the USB ter-
minal and MIDI terminals

The relationship between the [MIDI] terminals and the 
[USB] terminal which can be used for transmitting/
receiving 32 channels (16 channels x 2 ports) of the 
MIDI messages is as follows:

Setting the Bass Note for Style Playback 
via MIDI Receive 

The explanations here apply to the BASS display to be 
called up in step 4 of the “Basic Operation” on 
page 196.
These settings let you determine the bass note for Style 
playback, based on the note messages received via 
MIDI. The note on/off messages received at the chan-
nel(s) set to “ON” are recognized as the bass note of the 
chord of Style playback. The bass note will be detected 
regardless of the [ACMP ON/OFF] or split point set-
tings. When several channels are simultaneously set to 
“ON,” the bass note is detected from merged MIDI data 
received over the channels.

Operation

Select the channel and set the “ON/OFF” for that chan-
nel. Use the All OFF item to set all channels to OFF.

RECEIVE display

MIDI/USB1

01–16

USB2

01–16

USB2

USB1

MIDI/USB 01–16

[MIDI IN] jack

MIDI reception

MIDI transmission

[USB TO 
HOST] jack

[MIDI OUT] jack

[USB TO 
HOST] jack

Port

handling

Merge

Merge

BASS display

Summary of Contents for Clavinova CVP-403



































































































































































































































Reviews:

No comments

Related manuals for Clavinova CVP-403

R-Go Numpad Break Manual preview
Numpad Break
Brand: R-Go Pages: 14
L33T GAMING THOR-MEGINGJORD User Manual preview
THOR-MEGINGJORD
Brand: L33T GAMING Pages: 4
Axxess AX-LR904 Installation Instructions Manual preview
AX-LR904
Brand: Axxess Pages: 8
Medeli AKX10 Owner'S Manual preview
AKX10
Brand: Medeli Pages: 196
Logitech LIGHTSPEED G915 TKL Manual preview
LIGHTSPEED G915 TKL
Brand: Logitech Pages: 27
Max 130.103 Instruction Manual preview
130.103
Brand: Max Pages: 12
NavInc USB-PEU-RD4 User Manual preview
USB-PEU-RD4
Brand: NavInc Pages: 5
Trekbit t303 Quick Start Manual preview
t303
Brand: Trekbit Pages: 5
Storm 1200 Application/Engineering Manual preview
1200
Brand: Storm Pages: 18
Dometic MagicWatch MWE7006 Programming Instructions Manual preview
MagicWatch MWE7006
Brand: Dometic Pages: 240
MoreFit Pure User Manual preview
Pure
Brand: MoreFit Pages: 34
enika Rx2 Z Quick Start Manual preview
Rx2 Z
Brand: enika Pages: 2
CenDyne KB450USW User Manual preview
KB450USW
Brand: CenDyne Pages: 4
Strong by Science G-Flight User Manual preview
G-Flight
Brand: Strong by Science Pages: 12
Roland E-300 Owner'S Manual preview
E-300
Brand: Roland Pages: 92
Visonic KP-250 PG2 Installer'S Manual preview
KP-250 PG2
Brand: Visonic Pages: 104
ViewSonic VSACC25612-1 User Manual preview
VSACC25612-1
Brand: ViewSonic Pages: 15
PYLE Audio PLCM4370WIR User Manual preview
PLCM4370WIR
Brand: PYLE Audio Pages: 5

Brands by name

Popular brands

Load more brands