26
CVP-509/505/503/501 Owner’s Manual
Star
ting Up
The File Selection display is for selecting Voice, Styles, and other data. The File
Selection display appears when you press one of the VOICE or STYLE category
selection buttons, SONG [SELECT] button, etc.
1
Location (drive) of data
PRESET
Location where pre-programmed (preset) data is stored.
USER
Location where recorded or edited data is saved.
USB
Location where data on USB storage device (USB flash memory,
floppy disk, etc.) is saved.This appears only when USB storage
device(s) is connected to the [USB TO DEVICE] terminal
(page 106).
2
Selectable data (files)
The files that can be selected on this display are shown. If more than 10 files
exist, the page numbers (P1, P2 ...) are shown below the files. Pressing the
corresponding button changes the display page. When other pages follow, the
“Next” button appears, and for the previous page, the “Prev.” button appears.
3
File/folder operation menu
You can save and manage your data files (copy, move, delete, etc.) from this
menu. For detailed instructions, refer to pages 68 – 71.
File Selection Display Configuration
3
2
1
NOTE
Hereafter in this manual, any USB
storage device such as USB flash
memory, floppy disk drive, etc. will be
referred to as “USB storage device.”
NOTE
The data, both pre-programmed and
your own original, are saved as
“files.”
NOTE
You can open the File Selection display
for a specified file from the [USB] button.
[USB]
→
[A] SONG/[B] STYLE/[C]
REGIST/[F] VOICE.