CVP-609/605 Owner’s Manual
15
Sta
rting
U
p
5
After you use the instrument, press the [
P
] (Standby/On) switch to
turn the power off.
The display and power indicator turn off.
During recording, editing and display of certain messages, the power cannot be
turned off even if you press the [
P
] switch. If you want to force-quit the
instrument in such a situation, press and hold the [
P
] switch for longer than three
seconds.
6
Lower the key cover back in place gently with both hands.
CAUTION
Even when the power switch
is turned off, electricity is
still flowing to the instrument
at the minimum level. When
you are not using the
instrument for a long time,
make sure you unplug the
power cable from the wall AC
outlet.
NOTICE
• If you force-quit the
instrument during
recording or editing, data
might be lost, and the
instrument and external
devices might be damaged.
• Any data which is not
saved via the Save
operation will be lost if the
power automatically turns
off. Make sure to save your
data before this happens.
• Depending on the
instrument status, the
power may not turn off
automatically, even after
the elapse of the specified
period of time. Always turn
off the power manually
when the instrument is not
in use.
Auto Power Off function
To prevent unnecessary power consumption, this instrument features an Auto Power Off
function that automatically turns the power off if the instrument is not operated for a
specified period of time. The amount of time that elapses before the power is
automatically turned off is approximately 30 minutes by default; however, you can
change the setting (page 16).
CAUTION
Be careful to avoid catching your fingers when
closing the cover.
Summary of Contents for Clavinova CVP-609
Page 115: ...CVP 609 605 Owner s Manual 115...
