CVP-609/605 Owner’s Manual
85
C
on
n
ec
tio
n
s – U
sin
g Y
our I
n
str
u
men
t w
ith
O
th
er
D
ev
ices
–
Playing a Portable Audio Player with the Built-in Speakers
You can connect the headphone jack of a portable audio player to the instrument’s [AUX
IN] jack, letting you hear the sound of that audio player through the built-in speakers of
the instrument.
Using an External Stereo System for Playback
You can connect a stereo system to amplify the instrument’s sound by using the AUX
OUT [L/L+R]/[R] jacks. The microphone or guitar sound connected to the instrument’s
[MIC./LINE IN] jack is output at the same time.
Connecting Audio Devices ([AUX IN] jack, AUX
OUT [L/L+R]/[R] jacks)
NOTE
Use audio cables and adaptor
plugs having no (zero)
resistance.
NOTICE
To avoid damage to the
devices, first turn on the
power to the external device,
then to the instrument. When
turning off the power, first
turn off the power to the
instrument, then to the
external device.
NOTE
The instrument’s [MASTER
VOLUME] setting affects the
input signal from the [AUX IN]
jack.
NOTE
Use only the [L/L+R] jack for
connection with a monaural
device.
NOTICE
• To avoid possible damage,
first turn on the power to
the instrument, then to the
external device. When
turning off the power, first
turn off the power to the
external device, then to
the instrument. Since this
instrument’s power may
automatically be turned off
due to the Auto Power Off
function (page 15), turn off
the power to the external
device, or disable Auto
Power Off when you do
not intend to operate the
instrument.
• Do not route the output
from the [AUX OUT] jacks
to the [AUX IN] jacks. If
you make this connection,
the signal input at the
[AUX IN] jacks is output
from the [AUX OUT] jacks.
These connections could
result in a feedback loop
that will make normal
performance impossible,
and may even damage the
equipment.
Minimizing noise of the input sound via Noise Gate
By default, this instrument cuts unwanted noise from the input sound. However, this may
result in wanted sounds also being cut, such as the soft decay sound of the piano. To avoid this,
set the Noise Gate to off via [Menu] → [Utility] → [Speaker/Connectivity] → [AUX In Noise
Gate].
Instrument
Portable audio player
Headphone jack
Phone plug
(stereo mini)
Phone plug
(stereo mini)
Audio cable
Audio signal
Instrument
Powered speaker
Audio cable
Audio signal
Phone plug
(standard)
Phone plug
(standard)
Input jack
Summary of Contents for Clavinova CVP-609
Page 115: ...CVP 609 605 Owner s Manual 115...
