Editing the Volume and Tonal Balance (Mixer)
CVP-809/CVP-805 Reference Manual
13
NOTE
For details about the Effect types, refer to the “Effect Type List” in the Data List (separate PDF).
Editing and Saving the Effect settings
You can edit the settings of the System Effects (Chorus, Reverb), Insertion Effects and Variation Effect. The edits can be
saved as a User Effect type.
1
From the Mixer display, touch the desired Effect type to call up the Effect Type Selection
display.
2
Select the Effect type if necessary, then touch
(Setting) to call up the Effect Parameter
display.
3
Make the necessary setting for each parameter.
The available parameters differ depending on the Effect type.
NOTE
Parameters that are grayed out cannot be edited.
4
Touch
(Save), then save the settings as a User Effect type.
Up to 30 Effect types can be stored for each of the Effect Blocks.
NOTICE
The settings will be lost if you turn the power to the instrument off without executing the Save operation.
NOTE
If you want to save the Effect settings to a USB flash drive, save as a User Effect file. To do this, from the display called up
via [Menu]
[Utility]
[Factory Reset/Backup]
page 2/2, touch [Backup] of “User Effect” to execute the Save
operation (
Insertion Effect
Lets you assign the desired Insertion Effect Type for each part by touching the area above each
knob. You can adjust the degree to which each Effect is applied by using the knobs.
If you want to assign each of the Insertion Effects to a specific Part and select an Effect Type,
touch
(Setting) at the upper right of this area and make necessary settings in the window.
The assignable Parts for each Insertion Effect are as follows:
CVP-809
• Insertion Effect 1 – 19:
Keyboard Parts, Song channels 1 – 16
• Insertion Effect 20:
Microphone, Song channels 1 – 16
• Insertion Effect 21 – 28:
Style Parts
CVP-805
• Insertion Effect 1 – 5:
Keyboard Parts, Song channels 1 – 16
• Insertion Effect 6:
Microphone, Song channels 1 – 16
• Insertion Effect 7 – 8:
Style Parts
Variation Effect
Touch [Insertion] or [System] to switch the Effect Connection between the Insertion Effect and
System Effect, then touch the right end of this line to select the desired Effect type.
When “System” is selected, this Effect is applied to all parts of the Song and Style as the System
Effect. When “Insertion” is selected, this Effect is applied only to the specified Song/Style part.
To adjust the degree to which the Effect is applied, use the knob of each part.
3
4
2
