Creating/Editing MIDI Songs (Song Creator)
CVP-809/CVP-805 Reference Manual
69
Example of Step Recording — Melodies
•
The numbers shown in the illustration correspond to the following operation step numbers.
•
The illustration given here is just a sample. Since the music score (called up via [Menu] → [Score]) is generated from recorded MIDI
data, it may not appear exactly the same as shown above. Non-note musical performance symbols will not be shown in the Score
display, even if you’ve entered them.
This section describes the instructions on inputting the melodies of the above notation via the Step Recording. Before
starting, note the following points:
• To input the note with the tie in step 4, you need to operate without releasing the key. Proceed with the operations,
reading the instructions carefully.
• Before inputting notes as described below, select the desired Voice by using the Voice buttons. Even if it has already
been selected, you need to re-select the same Voice to input the Voice number to the Event List. Keep in mind that only
note and Voice selection events can be input with Step Recording.
1
Enter the first and second notes with a slur.
1-1
Touch [Velocity] to select “
.”
1-2
Touch [Length] to select “99% (Tenuto).”
1-3
Touch [Note Type] once or twice to call up the dotted note type.
1-4
Touch the dotted quarter-note length (
) to turn it on.
1-5
Press the C3 key.
With the operations above, the first note has been entered. Next, enter the second note.
1-6
Touch [Note Type] once or twice to call up the normal note indications.
1-7
Touch the eighth-note length (
) to turn it on.
1-8
Press the D3 key.
The first and second notes are entered with a slur.
2
Enter the next notes with staccato.
2-1
Touch [Length] to select “40% (Staccato).”
2-2
Touch the quarter-note length ( ) to turn it on.
2-3
Play the keys E3 and F3 in order.
The first measure has been completed.
7
Note Type, Note
Indication
Touching [Note Type] repeatedly will alternate the type of the note indications at right
in order: normal, dotted, and triplet. Select one of three types, then select (turn on)
one of the note indications with which the next note is input. If you touch the selected
note indication (which is turned on) again, a rest will be input with the corresponding
length.
8
Delete
Deletes the selected data.
1
2
3 4
