INSTALLING THE INCLUDED PARTS
– 5 –
79
Move the lever
d
of the front axle
2
to “OPEN”
facing the notch
e
.
With the lever
d
caught in the notch
e
, turn
and tighten until there is a little resistance in the
lever.
Free the lever
d
.
Determine the position to secure the lever
d
and fasten it at “CLOSE”.
TIP
If the lever
d
of the front axle
2
is too hard and
cannot be lowered, or if it is too loose and cannot
be lowered for it to be locked, turn the lever
d
again to loosen or tighten it, adjusting so that it can
be fastened securely.
2. Installing the handlebar stem
Position the handlebar stem
a
in a straight line
with the front wheel.
Tighten the bolts
b
and
c
, in that order, to the
specified torques.
e d
d
d
8
Position the lever when it cannot touch
obstacles while the bicycle is moving. If not,
the lever could be unlocked unexpectedly,
causing the front wheel to come off, result-
ing in an accident with severe injury or
death.
8
Fasten the lever
d
at position where the tip
does not touch other parts when the lever
d
is lowered.
8
Fasten the lever
d
facing backward from
the direction of travel in such a way that it
cannot easily touch obstacles that might be
encountered while riding.
WARNING
a
b
c
c
Tightening torque 3.0 N·m (0.30 kgf·m, 2.2 lb·ft)
Tightening torque 6 N·m (0.6 kgf·m, 4.4 lb·ft)
