■
■
■
■
■
Adjust mixing ratio
1.Open the rubber cover which locates
under seat.
1. Remove the crankcase cover.
2. Take out the filter to clean.
■
■
■
■
■
Crankcase filter
MAINTENANCE
WARNING
Use the specified solvent to clean
the parts, never use petrol or sol-
vent with low flash point which will
cause fire or explosion.
CAUTION:
Do not twist the filter element to
avoid of damages.
3. Apply suitable engine oil (SAE 10W-
30) to the filter element after drying.
4.Install the filter element, crankcase
cover and kick-starter back.
CAUTION:
To avoid fast wearing of the parts
in belt chamber, you should main-
tain the filter element in the belt
chamber as per time and mileage
listed in the Consumer Manual.
2.Adjust the screw.
NOTE:
The mixing ratio pre-set should be
operated by local agency.
7-6
mixing ratio
adjustment
screw
Summary of Contents for CYGNUS RS XC125E
