Play Along with a Pattern
16
DD-45/YDD-40 Owner’s Manual
Adjusting the Tempo
The Pattern tempo and Click tempo can be set any-
where from 11 to 280 beats per minute. The higher
the tempo value, the faster the tempo.
1.
Press the [TEMPO/TAP] button.
The current tempo value appears in the display.
2.
Use the [
] and [
] buttons to
set the tempo.
Press the [
] button to increase the Tempo value,
and press the [
] button to decrease the value.
Pressing the [
] and [
] buttons simultaneously
restores the preset tempo of the currently selected
Pattern.
NOTE
• The tempo value cannot be changed while the Demo Song is
playing.
Tap Start
The Tap Start function allows you to set the Pat-
tern’s overall tempo as well as start the accompani-
ment—simply by tapping out the rhythm. The
accompaniment plays back at the tempo with which
the pads are struck or the pedal is pressed.
1.
Tap the [TEMPO/TAP] button four
times at the desired tempo.
The current tempo value appears on the display,
and the Pattern playback starts automatically at the
tempo you tapped.
The tempo can also be changed during Pattern
playback by tapping the button twice at the desired
tempo.
NOTE
• For a 6/8 measure, the [TEMPO/TAP] button needs to be tapped
six times in order for the tempo to be detected.
• The detected tempo range is 32–280.
To stop playback of the Pattern, press the [START/
STOP] button.
Tempo
Display
Comment
40
—
120
Values of 100 and over are indi-
cated by a single dot.
240
Values of 200 and over are indi-
cated by two dots.
20
Tempo
value
40
20
40
11
12
79
80
11
12
79
80
