About MIDI
33
DD-65/YDD-60 Owner’s Manual
Ordinarily, you should keep this function set to on for the instrument (default setting is on).
When MIDI Number Auto Selection is on and you strike the pad, the MIDI note number correspond-
ing to the pad (voice) you strike is sent via the MIDI OUT terminal.
On the other hand, when MIDI Number Auto Selection is off and you strike the pad, the MIDI note
number that you’ve specifically assigned to the pad is sent via the MIDI OUT terminal.
1
Enter the MIDI Number Auto Selection setting
function.
2
Set MIDI Number Auto Select on/off as desired.
3
Press the [FUNCTION] button to exit from the
Function mode.
MIDI Note Number Auto Selection ON/OFF
After pressing the
[FUNCTION]
button, press the
[DRUM 1]
or
[DRUM 2]
button a number of times until the “
Ant
” item appears.
After a while, the current setting (on/off) appears next to “
Ant
”.
Turn the DIAL clockwise to set to ON, and turn it counter-clockwise
to set it to OFF.
• MIDI Note Number Auto Selection ON/OFF is automatically turned off
when a MIDI Note Number is changed.
Ant
On
OFF
NOTE
