Play the Pads/Pedals
DD-75 Owner’s Manual
21
5
Save to a Custom kit.
You can now play the voice you have assigned to the pad/pedal.
To call up the saved Custom Kit, press the [KIT] button and use the dial to
select a Custom Kit number.
• The Reverb Type of the currently assigned Drum Kit will be carried over. To change the
Reverb type, please refer to “Setting the Reverb type.”
This control adds reverberation to the sound by simulating the natural reverberation of a concert hall. The ideal
Reverb type is automatically selected whenever you select a Kit, but you can change to any of the available
Reverb types, if desired.
1
Enter the Reverb type setting function.
2
Change the reverb type by turning the dial.
3
Press the [FUNCTION] button to exit from the Function
mode.
Press the [KIT ASSIGN] button to save to a Custom Kit (the lamp
turns off).
Setting the Reverb type
Press the [FUNCTION] button once, then press the [DRUM 3] or
[BACKING] button a number of times until the “
rbt
” item appears.
The currently selected Reverb type appears next to the “
rbt
” indica-
tion.
Unlit
NOTE
Display
Reverb Type
Display
Reverb Type
oFF
Off
ro2
Room 2
HA1
Hall 1
St1
Stage 1
HA2
Hall 2
St2
Stage 2
HA3
Hall 3
PL1
Plate 1
ro1
Room 1
PL2
Plate 2
Summary of Contents for DD-75
Page 58: ...DD 75 58 ...