Playing a Song
DD-75 Owner’s Manual
30
2
Play an appropriate Tap Start.
3
Stop the Song playback.
The Pad Start function allows you to start the song simply by striking a pad or pressing a pedal.
1
Enter the Pad Start setting function.
2
Turn Pad Start On/Off.
3
Press the [FUNCTION] button to exit from the Function
mode.
In the case of a song in 4/4, strike any pad or press any pedal (or the
[TEMPO/TAP] button) four times, at a constant tempo, and the
accompaniment will start at the desired tempo.
• The number of times needed to strike the pad will change according to the follow-
ing time signatures; 5/4, 5 times; 4/4, 4 times; 3/4, 3 times; 6/8, 2 times.
Press the [START/STOP] button and the song accompaniment will
stop.
• If External Clock is ON, Tap Start is not effective.
• External Clock On/Off can be set from the [FUNCTION] button (page 40).
Pad Start
Press the [FUNCTION] button once, then press the [DRUM 3] or
[BACKING] button a number of times until the “
PdS
” item appears.
After a while, the current On/Off status appears next to the “
PdS
” indi-
cation.
Turn the dial clockwise to set to ON, and turn it counter-clockwise to
set it to OFF.
• Default setting is OFF.
The dot flashes, indicating Pad Start is enabled.
• To stop the song, press the [START/STOP] button.
NOTE
NOTE
NOTE
NOTE
Summary of Contents for DD-75
Page 58: ...DD 75 58 ...