49
En
FM tuning
BA
S
IC
OP
ERA
T
IO
N
English
Automatic tuning is effective when the radio station
signals are strong and there is no interference.
1
Set the operation mode selector to TV/AV.
2
Press FM to select FM as the input source.
“FM” appears in the front panel display.
y
• You can also press INPUT on the front panel repeatedly to
select FM as the input source.
• If “XM” appears in the front panel display, press FM/XM
again to display “FM” (U.S.A. and Canada models only).
3
Press SEARCH repeatedly until the AUTO
indicator lights up in the front panel display.
If a colon (:) appears in the front panel display, tuning
is not available. Press PRESET/TUNE to turn the
colon (:) off.
4
Press ENTRY (
/
) once to begin
automatic tuning.
When this unit is tuned into an FM station, the
TUNED indicator lights up and the frequency of the
station appears in the front panel display.
• Press
to tune into a higher frequency.
• Press
to tune into a lower frequency.
If the desired FM station signal is weak, tune into it
manually.
Manual tuning automatically switches the tuner to the monaural
reception mode to increase the signal quality.
1
Set the operation mode selector to TV/AV.
2
Press FM to select FM as the input source.
“FM” appears in the front panel display.
y
• You can also press INPUT on the front panel repeatedly to
select FM as the input source.
• If “XM” appears in the front panel display, press FM/XM
again to display “FM” (U.S.A. and Canada models only).
Automatic tuning
YSP
TV/AV
FM
A
F M 8 8 . 9 M H z
Lights up
No colon (:)
SEARCH
Manual tuning
Note
ENTER
ENTRY
YSP
TV/AV
FM
