Internet Direct Connection (IDC)
English
9
Chapter
103
To use the Internet connection,
inquire of your Internet service
provider.
You can change various settings related to the Internet connection. In most
cases, you do not have to change the default factory settings.
Note:
For information about DNS server
address, IP address, subnet mask
and gateway server address, inquire
of your internet service provider.
Information
You can confirm the information of network settings.
Use DHCP
Select the method to determine several addresses. If your router has
DHCP server function, we recommend that you to select “DHCP” or
“DHCP+DNS.”
DNS1/DNS2
Enter the address of the primary and secondary DNS server. These
settings must be made when Use DHCP is set to “DHCP+DNS” or
“MANUAL.”
IPAddr./SubMask/Gateway
Enter the address of the control unit, subnet mask and gateway server.
These settings must be made when Use DHCP is set to “MANUAL.”
Proxy/Proxy Port
Enter the name and the port number for the proxy server. These settings
are necessary only when a proxy server is located in your local network.
Press [SETUP] on the remote control.
The setup menu screen appears.
Select “Network” with the cursor buttons ([
] [
] [
]
[
]), then press [ENTER].
The network setting screen appears.
Setting the Disklavier for the Internet Connection
[SETUP]
“Network”
1
*
TimerPlay
*MIDI
*AudioI/O
*M-Tune
=SETUP MENU=
(1/3)
2
*
Network
*Playback
*Shortcut
=SETUP MENU=
(2/3)
]
Summary of Contents for DISKLAVIER E3 CLASSIC
Page 1: ......
Page 11: ...English Classic Operation manual ...
Page 157: ...Appendix Classic Appendix ...
