A-21
App
end
ix
MIDI Data Form
at
MIDI Data Format
If you are familiar with MIDI, or are using a computer to control your music software with computer-
generated MIDI messages, the data provided in this section can help you to control your Disklavier.
Messages include those that can be received by the piano part and/or those that can be received by an
ESBL part. Messages that can be transmitted as well as received are shown as “transmitted.”
1.
CHANNEL MESSAGES
1.1
Key On / Key Off
(Piano Part, ESBL Part) (transmitted)
Piano Part reception note range = A-1~C7 : C3=60
ESBL part reception note range = C-2~G8
Velocity range = 1~127 (Only the Key On velocity is received)
1.2
Control Change
1.2.1
Bank Select
(ESBL Part) (transmitted)
Cntrl#
Parameter
Data Range
0
Bank Select MSB
0: Normal,
63: User voice,
64: SFX,
126: SFX kit,
127: Drum
32
Bank Select LSB
0...127
You can select the Voice banks with MSB and LSB numbers.
MSB and LSB functions differently depending on the play mode.
In XG mode, MSB numbers select Voice type (Normal Voice or
Drum Voice), and LSB number select Voice banks.
In TG300B mode, LSB is fixed, and MSB numbers select Voice
banks.
(See Normal Voice List Drum Voice List.)
A new bank selection will not become effective until the next
Program Change message is received.
1.2.2
Modulation
(ESBL Part)
Cntrl#
Parameter
Data Range
1
Modulation
0...127
1.2.3
Portamento Time
(ESBL Part)
Cntrl#
Parameter
Data Range
5
Portamento Time
0...127
When the parameter 1.2.9 Portamento = ON, values will adjust
the speed of pitch change.
A setting of 0 - minimum portamento time, and 127 - maximum
portamento time.
1.2.4
Data Entry
(ESBL Part)
Messages which set the value for the parameter specified by
RPN/NRPN.
Cntrl#
Parameter
Data Range
6
Data Entry MSB
0...127
38
Data Entry LSB
0...127
Parameter value is determined by combining MSB and LSB.
1.2.5
Main Volume
(Piano Part, ESBL Part) (transmitted)
Cntrl#
Parameter
Data Range
7
Main Volume
0...127
1.2.6
Pan
(ESBL Part)
Cntrl#
Parameter
Data Range
10
Pan
0...127
1.2.7
Expression
(Piano Part, ESBL Part)
Cntrl#
Parameter
Data Range
11
Expression
0...127
1.2.8
Hold1
(Piano Part, ESBL Part) (transmitted)
Cntrl#
Parameter
Data Range
64
Hold1
0...127
(0-63:off, 64-127:on)
1.2.9
Portamento
(ESBL Part)
Cntrl#
Parameter
Data Range
65
Portamento
0...127
(0-63:off, 64-127:on)
1.2.10 Sostenuto
(Piano Part, ESBL Part)
Cntrl#
Parameter
Data Range
66
Sostenuto
0...127
(0-63:off, 64-127:on)
1.2.11 Soft Pedal
(ESBL Part)
Cntrl#
Parameter
Data Range
67
Soft Pedal
0...127
(0-63:off, 64-127:on)
1.2.12 Harmonic Content
(ESBL Part)
Messages which adjust the resonance set for each Voice.
Cntrl#
Parameter
Data Range
71
Harmonic Content
0...127
(0:-64, 64:+0, 127:+63)
Higher values will result in a more characteristic, resonant sound.
Depending on the Voice, the effective range may be narrower
than the range available for adjustment.
1.2.13 Release Time
(ESBL Part)
Messages which adjust the envelope release time set for each
Voice.
Cntrl#
Parameter
Data Range
72
Release Time
0...127
(0:-64, 64:+0, 127:+63)
1.2.14 Attack Time
(ESBL Part)
Messages which adjust the envelope attack time set for each
Voice.
Cntrl#
Parameter
Data Range
73
Attack Time
0...127
(0:-64, 64:+0, 127:+63)
1.2.15 Brightness
(ESBL Part)
Messages which adjust the filter cutoff frequency set for each
Voice.
Cntrl#
Parameter
Data Range
74
Brightness
0...127
(0:-64, 64:+0, 127:+63)
1.2.16 Portamento Control
(ESBL Part)
Messages which apply a portamento between the currently-
sounding note and the subsequent note.
Cntrl#
Parameter
Data Range
84
Portamento Control
0...127
1.2.17 Effect1 Depth (Reverb Send Level)
(ESBL Part)
Cntrl#
Parameter
Data Range
91
Effect1 Depth
0...127
Summary of Contents for DISKLAVIER E3 CLASSIC
Page 1: ......
Page 11: ...English Classic Operation manual ...
Page 157: ...Appendix Classic Appendix ...
