background image

 

DM2000/02R96/DM1000 Version2 System Software Installation Guide

 

3

 

ENGLISH

 

System Requirements

 

To install the system software successfully, you must have a 
computer and access to the Internet in satisfaction of the 
following requirements:

 

Windows

Macintosh

 

Contents of the Firmware CD-ROM

 

• Yamaha USB-MIDI Driver

 

This driver enables the computer and the console to 
communicate with each other via their USB ports. Install this 
driver before you update the system software. Mac OS 9 users 
must first install OMS, then install the Yamaha USB-MIDI 
Driver.

See the Studio Manager Installation Guide for more information 
on installing drivers.

 

• Installer (System Software Installer)

 

This installer updates the system software.

 

• DM2000 (or 02R96/DM1000) Version 2 Owner’s 

Manual (PDF format)

 

The Useguide_ folder contains a PDF version of the printed 
Owner’s Manual.

 

Installing System Software

 

NOTE: 

 

Some operating systems may have to satisfy other 

requirements in addition to those described below.

 

NOTE: 

 

See the Studio Manager Installation Guide for information 

on system requirements for Studio Manager.

 

OS:

Windows 98SE, Me, 2000, XP Home Edition, 
XP Professional

Computer:

PC that features a USB port and an Intel 
Pentium or Celeron-family processor of 433 
MHz or higher

Memory:

128 MB or more

Hard disk:

Available space of 10 MB or more

Display:

1024 x 768 pixels, 256 colors or more
(High Color 16-bit or more recommended)

Other 
requirements:

Access to Internet, 
Internet Explorer 5.0 or higher

OS:

Mac OS 9.0 - 9.2.2, Mac OS X 10.2 or higher

Computer:

Power Macintosh G3/233 MHz or higher that 
features a USB port

Memory:

Available memory of 16 MB or more
(Turn off the virtual memory.)

Hard disk:

Available space of 10 MB or more

Display:

1024 x 768 pixels, 256 colors or more
(32,000 colors or more recommended)

Other 
requirements:

Access to Internet, 
OMS 2.3.3 or higher (For Mac OS 9)

 

NOTE: 

 

Mac OS 9.0 users must update URL Access. 

For more information, visit the Apple Computer website.

 

NOTE: 

 

Adobe Reader (available free of charge) must be installed in 

your computer in order to view the PDF manual. If you don’t have 
Adobe Reader, use the weblink given below to open the Adobe 
Corporation website, and download Adobe Reader. This is not 
necessary if you are using Mac OS X.
http://www.adobe.com

Summary of Contents for DM2000V2K














Reviews: