Yamaha DM3, Owner'S Manual

DM3 Owner’s Manual

9

Utility Software

A variety of utility software is available for the DM3 Series. 
Detailed information about software can be found on the 
Yamaha Audio website. 
https://www.yamahaproaudio.com/
Please refer to the website above and installation guides of 
downloaded programs for how to download, install and 
make advanced settings to software.

DM3 Editor

This software is for setting up and operating the unit on a 
computer. It can also backup unit settings and perform 
setup in locations without the main unit.

DM3 StageMix

This is an iPad application for wirelessly controlling the 
DM3 Series system. It allows mixing engineers to 
manipulate mixing parameters directly, such as positioning 
of performers onstage, while away from the system.

MonitorMix

This software was designed for smart devices to wirelessly 
control MIX sending of the DM3 Series.

Yamaha Steinberg USB Driver

This is driver software for connecting a DM3 Series with a 
computer. It allows up to 18IN/18OUT audio signals to be 
exchanged with DAW software and to remotely control the 
DAW software.

Firmware Updates

The specification of the DM3 Series allows the firmware of 
the main unit to be updated for improved operability, added 
functions and to correct problems.
Information on updating the firmware can be found on the 
following site.
https://www.yamahaproaudio.com/
For information on the updating procedure and making 
settings for the main unit, refer to the Firmware Updating 
Guide on the website.

Notation Conventions used in the 
Owner’s Manual

This manual calls switches on the panel “keys.” Controls on 
the panel are written inside brackets [ ] to distinguish them 
from virtual buttons and knobs displayed onscreen. 
(Example: [CUE] Key) The section name may be written in 
front of the brackets for some controls. (Example: USER 
DEFINED KEYS [1] Key)