2
DME Designer Installation Guide
English
1
Confirm that your computer and operating system are compatible with the software in this CD-ROM. (See page 10.)
2
Install the appropriate driver (YAMAHA USB-MIDI Driver/YAMAHA DME-N Network Driver) on your computer.
3
Make appropriate settings for the driver.
4
Install the DME Designer.
5
Start the DME Designer.
For instructions and details on using the software, refer to the DME Designer Owner’s Manual.
Never attempt to play back the included CD-ROM on an audio CD player.
Doing so may result in damage to your hearing as well as to your CD player/audio speakers.
This CD-ROM contains the following software.
This CD-ROM is only compatible with Windows
®
XP Professional/XP Home Edition/2000 Professional.
In this manual, “DME ” is used to refer to Digital Mixing Engine models such as the DME64N/DME24N/DME8i-C/
DME8o-C/DME4io-C: however, this does not include the DME32.
CD-ROM Installation Procedure
CD-ROM Contents
Folder
Content
Description
Relevant
pages
USBdrv2k_
YAMAHA USB-MIDI Driver
Enables your computer to communicate with the DME when your
computer and the DME are connected using a USB cable.
Networkdrv_
YAMAHA DME-N Network Driver
Enables your computer to communicate with the DME when your
computer and the DME are connected using Ethernet.
DMEDesigner_
DME Designer
Application for designing configurations of the DME, sending data to
the DME, controlling the DME, and so on.
Manual
English
Manuals
English Installation Guide & Owner's Manual for DME Designer, ICP1,
CP4SW/CP4SF/CP1SF.
—
German
Manuals
German Installation Guide & Owner's Manual for DME Designer, ICP1,
CP4SW/CP4SF/CP1SF.
—
French
Manuals
French Installation Guide & Owner's Manual for DME Designer, ICP1,
CP4SW/CP4SF/CP1SF.
—
Spanish
Manuals
Spanish Installation Guide & Owner's Manual for DME Designer, ICP1,
CP4SW/CP4SF/CP1SF.
—
Japanese
Manuals
Japanese Installation Guide & Owner's Manual for DME Designer, ICP1,
CP4SW/CP4SF/CP1SF.
—
