P
anel Operation and Displa
ys
Utility Displays
DME64N/DME24N Owner’s Manual
54
Head Amplifier Setup (HA) Page
Provides access to the head amplifier settings. Refer to
“REMOTE Connection” on page 28 for head amplifier
control signal connection.
Internal Head Amplifier (DME24N only)
AD8HR
AD824
1
HA
Specifies the type of head amplifier to be set up. The
available options are AD8HR, AD824, and Built-in HA
(DME24N only). When the AD8HR and AD824 are
selected, a number indicating the connection order will
also appear.
Edit using the “List Parameters” editing procedure
described on page 38.
2
WCLK (AD8HR/AD824 only)
Specifies the word clock signal to be used by the head
amplifier(s).
Available settings of the AD8HR are “D OUT A,”
“WCLK IN,” “INT44.1K,” “INT48K,” “INT88.2K,” and
“INT96K.”
D OUT A:
Sets the word clock signal at the digital input
as the master clock of the AD8HR.
WCLK IN:
Sets the word clock signal at BNC connector
as the master clock of the AD8HR.
INT44.1K:
Sets the 44.1 kHz internal word clock as the
master clock of the AD8HR.
INT48K:
Sets the 48 kHz internal word clock as the
master clock of the AD8HR.
INT88.2K:
Sets the 88.2 kHz internal word clock as the
master clock of the AD8HR.
INT96K:
Sets the 96 kHz internal word clock as the
master clock of the AD8HR.
Available settings of the AD824 are “SLOT,” “BNC,”
“INT44.1K,” and “INT48K.”
SLOT A:
Sets the word clock signal input via I/O cards
installed in the I/O slots as the master clock of the
AD824.
BNC:
Sets the word clock signal at the BNC connector as
the master clock of the AD824.
INT44.1K:
Sets the 44.1 kHz internal word clock as the
master clock of the AD824.
INT48K:
Sets the 48 kHz internal word clock as the
master clock of the AD824.
3
Format (AD8HR only)
Displays the 88.2/96 kHz audio signal transfer mode. The
input setting is on the left and the output setting is on the
right.
No Display (default):
44.1/48 kHz audio signal
transfer.
SP (Double Speed):
Allows direct transfer at 88.2 or
96 kHz.
CH (Double Channel):
88.2 or 96 kHz audio is
transferred by using two 44.1/48 kHz channels to transfer
each audio channel of 88.2 and 96 kHz respectively. The
number of audio channels that can be handled in this
mode is half the number of channels normally handled by
the AD8HR.
NOTE
This page will not appear on the ICP1 display.
NOTE
Some scenes include head amplifier settings. In such cases, the
HA page settings will be saved along with the scene when it is
stored.
1
4
5
1
3
2
5
4
7
8
6
1
2
4
5
Summary of Contents for DME64N - Pro Audio
Page 1: ......
