Appendix
42
NOTE:
*1 Value of Pan for each drum pad and foot pedal is not transmitted via MIDI.
*2 The DD-55 can accept Start/Stop signals, received via MIDI, by setting the MIDI clock to “External”.
*3 This data is transmitted only when it is contained in the song data.
*4 Exclusive
<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H
• This message automatically restores all default settings for the instrument, with the exception of MIDI
Master Tuning.
<MIDI Master Volume> F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H
• This message allows the volume of all channels to be changed simultaneously (Universal System
Exclusive).
• The values of “mm” is used for MIDI Master Tuning. (Values for “ll” are ignored.)
<Reverb Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H
• mm : Reverb Type MSB
• ll : Reverb Type LSB
Refer to the Effect Map (page 43) for details.
<Chorus Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H
• mm : Chorus Type MSB
• ll : Chorus Type LSB
Refer to the Effect Map (page 43) for details.
<DSP Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 40H, mmH, llH, F7H
• mm : DSP Type MSB
• ll : DSP Type LSB
Refer to the Effect Map (page 43) for details.
<DRY Level> F0H, 43H, 1nH, 4CH, 08H, 0mH, 11H, llH, F7H
• ll : Dry Level
• 0m : Channel Number
*5 Recording to an external sequencer from the DD-55 and playing back the data may result in selection of a
different Reverb effect or a different kit.
Sending MIDI data from the DD-55 to an external tone generator may result in an unexpected voice, partic-
ularly if the tone generator doesn’t have the same kind of voice as the DD-55.