MIDI Functions
24
You can enjoy using personal computer music software when you connect your DD-55’s MIDI ter-
minals to a personal computer. Make sure to use only special MIDI cables.
●
Connect the MIDI terminals of the DD-55 to the MIDI terminals of the MIDI inter-
face installed to your computer.
●
When using a MIDI interface with a Macintosh series computer, connect the RS-422
terminal of the computer (modem or printer terminal) to the MIDI interface, as shown
in the diagram below.
●
When connecting to a computer with a USB interface, use the Yamaha UX16 USB/
MIDI Interface. Connect the UX16 and the computer with a standard USB cable,
then make the proper MIDI connections between the DD-55 and the UX16.
• If you use the Yamaha UX16, be sure to install the supplied driver on your com-
puter.
Connecting to a Computer
MIDI OUT
MIDI IN
MIDI IN
MIDI OUT
DD-55
Computer
(sequencer software)
MIDI OUT
RS-422
MIDI IN
DD-55
Computer
(sequencer software)
MIDI
Interface
DD-55
IN
OUT
MIDI IN
USB
MIDI OUT
UX16
Computer
(sequencer software)