31
Appendix
Initialize.....................................................................................
The DD-55’s Custom Song, Custom Kit, and Panel Setting data are backed up so long
as power is supplied to the DD-55 by means of batteries or an AC adaptor.
Initialize is the term which refers to this data being restored to its original factory set-
tings. To initialize the DD-55, follow the procedure below.
• Keep in mind that initializing the data erases any and all of the original data you
saved to the instrument.
q
Turn the power off. (Move the
[STANDBY/ON]
switch to the
STANDBY position.)
w
While holding down the
[DEMO]
button, turn the power on again.
(Move the
[STANDBY/ON]
switch to the ON position.)
The DD-55 will be initialized to its factory settings. “
C|r
” will
appear in the display when the initialization process is complete.
C|r
The following data will remain in memory, as long as batteries are
installed or an AC adaptor is connected, even if the power is turned
off.
• Custom Song
• Custom Kit
• Auto Kit Selection
• MIDI Transmit Channel for the PAD
• MIDI Transmit Note for the PAD
• Pad Sensitivity