background image

 

47

 

Manual recording

 

m

 

To ensure you don’t accidentally delete a recording you can protect the entire disc. You 
can only ever protect the entire disc. You cannot protect individual recordings.

 

1

 

Insert the disc to be protected.

 

2

 

While the index screen is displayed press 

 

STOP

 

 on the remote control. The 

first title is highlighted.

 

3

 

Press 

 

v

 

. This takes you to the disc info screen.

 

4

 

Press the 

 

u

 

 button.

Select the “

 

Protection

 

” line.

Confirm with 

 

u

 

.

 

5

 

Select “

 

Protected

 

” with the 

 

w

 

 button and confirm with 

 

ENTER/OK

 

.

 

6

 

Press 

 

t

 

 and then 

 

TOP MENU 

 

to terminate.

The entire disc is now protected.
If an attempt is made to record on a protected disc, “DISC LOCK” will appear on the 
display and “

 

Disc locked

 

” will appear on the screen.

On a recorded DVD+RW disc you can add another recording to an existing title. This 
recording is added to the title as a “chapter”. The existing information will be overwrit-
ten starting from this point. Titles will also be overwritten that follow the current title 
depending on the length of the new recording. The recording type (Quality) will be 
taken from the current title.
To play back this recording, press 

 

SYSTEM-MENU 

 

and use the 

 

u

 

 button to select the 

“C” (Chapter) symbol. You can also use the 

 

TITLE/CHAP 

 

key.

For further information, see “Changing to another title/chapter” in “Additional playback 
features”.

 

1

 

In the index display, find the title to which the new recording is to be added.

 

2

 

Look at the last minute of the old recording (playback)

 

3

 

Press 

 

PAUSE

 

 on the remote control at the position where the new recording 

is to go. “

 

D

 

” will appear on the screen.

 

4

 

To monitor the recording you can press 

 

MONITOR 

 

to switch to the internal 

tuner.

 

Preventing accidental erasing of 
discs

 

Question

 

What happens with DVD+R discs?

 

As long as these discs are not finalised, they can be protected against accidental era-
sure in the same way as DVD+RW discs. 

 

Lining up recordings within a title 
(assemble cut)

 

Question

 

What happens with DVD+R discs?

 

New recordings on “DVD+R” discs can only be added after existing recordings.
It is not possible to overwrite existing recordings on “DVD+R” discs. 

DRX-2̲G.book Page 47 Tuesday, October 14, 2003 5:02 PM

Summary of Contents for DRX-2
















































































Reviews: