7
Notes
•
If your components are equipped with digital audio
signal output (and input) jacks, they can be connected to
this unit’s DIGITAL SIGNAL input (and output) jacks.
•
Even if you connect a component to the DIGITAL
SIGNAL jack of this unit, you must keep the component
connected with the same named analog audio signal
jacks of this unit, because digital signal cannot be
recorded by a tape deck or VCR other than the tape
deck connected to the OPTICAL TAPE 1 REC OUT jack
of this unit.
•
If your LD player has an AC-3 RF signal output jack,
connect it to this unit’s AC-3 RF SIGNAL input jack.
Audio signals encoded with the Dolby Surround AC-3
are input to this unit by this connection.
: RCA Pin Plug Connector Cable
(Red): Right Audio
(White): Left Audio
: Optical Fiber Cable
: Basic Connection (Required)
: Additional Connection For Higher
Sound Quality Or Special
Performance
8
Ω
MIN./SPEAKER
A B: 4
Ω
MIN./SPEAKER
A OR B: 8
Ω
MIN./SPEAKER
+
A B
A OR B
+
RONT
EFFECT
REAR
AC OUTLETS
SWITCHED
I00W MAX. TOTAL
200W MAX.
UNSWITCHED
VOLTAGE SELECTOR
To AC Outlet
(General Model)
