PM5D V2 Connectors
DSP5D Connectors
PM5D-RH V2 Connectors
PW800W Power Supply
The PM5D V2 is reliably powered by an external power supply unit. The PW800W is extremely
compact and lightweight (3U, 10kg). Thanks to its high efficiency, the low speed cooling fans
are extremely quiet. PW800W accepts 100 - 240 volts so it can be universally used. The
PW800W can also be used as a secondary “redundant” power supply for the DSP5D.
PSL120 Power Supply Link Cable
Two PW800W units can be serially connected using the optional PSL120 cable for failsafe
operation.
DCU5D Digital Cabling Unit
You can directly connect the DSP5D to a PM5D V2 via standard cascade cables if they are to be used in relatively close proximity. But if you want to use the DSP5D as a powerful on-stage DSP and
I/O expansion unit the DCU5D Digital Cabling Unit lets you locate the DSP5D as far as 120 meters* from the PM5D V2 console, connected only by one Cat-5 Ethernet cable. The DCU5D converts the
PM5D V2 cascade signals (68-pin D-sub connector) to and from Cat-5 audio, dramatically reducing cabling requirements while maintaining solid audio and control reliability over extended
distances. For maximum power reliability the DCU5D also features a 4-pin XLR connector that will accept standard external power supplies for failsafe redundant operation.
* Refer to http://www.ethersound.com/technology/compatibility.php
DSP5D and DCU5D utilize EtherSound technologies. But because bandwidth is fixed exclusively for DSP5D and DCU5D, they cannot be controlled by ES monitor.
ST IN Connectors
Master Phantom On/Off Switch
Input Connectors
ST IN Connectors
MIX OUT Connectors
OUTPUT Connectors
MONITOR/CUE/STEREO A, B/MATRIX
POWER INPUT
Connector
Expansion Slots for mini-YGDAI cards
Input/Insert Connectors
2TR IN ANALOG Connectors
2TR OUT DIGITAL Connectors
2TR IN DIGITAL Connectors
WORD CLOCK Connectors
MIDI Connectors
RS422 Connector
CASCADE IN Connector
CASCADE OUT Connector
HA REMOTE Connector
GPI Connector
TIME CODE Connector
TO HOST (USB) Connector
E x t e n s i ve A n a l o g a n d D i g i t a l Co n n e c t i v i t y
The PM5D V2, PM5D-RH V2, and the DSP5D all provide comprehensive analog and digital connectivity that makes it easy to set up
just about any type of system without requiring external interfacing. Flawlessly bridging the gap between the analog and digital
worlds are high-performance analog-to-digital and digital-to-analog converters that provide totally transparent conversion.
12
13
INPUT
ST IN
OMNI OUT
CASCADE IN/OUT
(D-sub 68pin)
WORD CLOCK
IN/OUT
Expansion Slots for mini-YGDAI cards
NETWORK Connector
CASCADE IN/OUT (CAT 5)
DC POWER INPUT
Front
Rear
･
ST IN Connectors
The PM5D-RH V2 and DSP5D ST IN connectors accept both line and microphone input,
while the PM5D V2 ST IN connectors accept line-level input only.
* MIX OUT Connectors of PM5D V2 can be used as OMNI OUT connectors.
