Basic Techniques
Practicing in Training Mode
46
DTX502 O
w
ner’s Man
u
al
Changing the number of measures after which the rhythm
changes
1.
With “05:Change Up” selected on the training menu
page (TRNG1), use the [
>
] button to navigate to the
TRNG9 page.
2.
Turn the Data Dial to select 1, 2, or 4 as the number
of measures after which the rhythm changes.
In Pad Gate training, the pads will only produce a sound when your drumming precisely matches
a practice drum pattern. When you have finished training, your score will be displayed on-screen.
In addition, you will be able to view the individual hit ratios for each of the drum parts.
Training procedure
1.
Hold down the [SHIFT] button and press the [KIT]
button to access Training Mode.
2.
Turn the Data Dial to select “06:Pad Gate”.
The [
] button will flash, indicating that the drum module is on standby to
start training.
3.
Press the [
] button when you are ready to go.
The currently selected song will start to play.
4.
Play the song’s drum pattern on the pads.
• The pads will not produce a sound if they are struck out of time.
• In addition, the pads will only produce a sound when you play the same drum pat-
tern as in the song.
5.
Use the [
<
]/[
>
] buttons to view the individual hit
ratios for the hi-hat, snare, kick, toms, and cym-
bals—that is, the percentage of times they were
played in time and matching the drum pattern in the
song.
6. Pad Gate
NOTE
The a
b
o
v
e setting cannot
b
e adj
u
sted
w
hile training.
tRNG9
” Measure=2
0% ¢¢¢¢¢
HiHa
t
HSKtC
Cym
b
als
Hit ratio
Hi-hat
Snare
Toms
Kick
C
u
rrently selected dr
u
m part
