16
DTX-PRO Owner’s Manual
Installing the DTX-PRO
Setup Guide
4.
Hook the AC adaptor’s cord around the cord
hook to secure it in place.
5.
Plug the AC adaptor’s AC plug into a domes-
tic power outlet.
Connecting Headphones
Connect the headphones to the [
] (headphone) jack.
To adjust the headphone volume, use the [MASTER VOLUME]
knob.
To adjust the headphone EQ, press the [MENU] button and
adjust the PhonesEQ parameter. (MENU/PhonesEQ)
For more information, refer to the Reference Manual (PDF).
CAUTION
Excessive bending can damage the AC adaptor cord
and create a fire hazard. Ensure, therefore, that the
power cord is not bent at an extreme angle when
wrapped around the hook.
CAUTION
Even when the [
] (Standby/On) switch is in standby
status (power lamp is off/display is off), electricity is
still flowing to the instrument at the minimum level.
When you are not using the DTX-PRO for a long period
of time, make sure that you unplug the AC adaptor
from the wall AC outlet.
NOTE
When disconnecting the AC adaptor, turn the instrument and then carry out this procedure in reverse order.
CAUTION
Do not use headphones at high volume for an extended
period of time. Doing so can cause loss of hearing.
Cord hook
AC adaptor cord
Power outlet
AC adaptor
Front panel side
Summary of Contents for DTX-PRO
