15
DTX-PRO Owner’s Manual
Installing the DTX-PRO
Setup Guide
Connecting the AC adaptor
1.
Make sure that the power is turned off (all
panel lights and the screen backlight are
off).
2.
For removable plug type AC adaptors only:
Make sure that the plug is not disconnected.
3.
Connect the AC adaptor.
WARNING
Only use the specified AC adaptor (page 66). Using a different AC adaptor can cause malfunction, overheating, fire, and
other problems. This may void the warranty so please take careful note.
CAUTION
Locate the DTX-PRO close to an AC outlet. If you notice any abnormalities during operation, turn the power off immedi-
ately and unplug the AC adaptor.
WARNING
• For AC adaptors with a removable plug, only use the
AC adaptor with the plug attached, and keep the
plug. Plugging only the plug into the power outlet
can cause electric shock or fire.
• If the removable plug comes off from the AC adaptor,
avoid touching the metal parts on the plug and slide
the AC adaptor onto the plug until you hear it lock on
to the adaptor with a click. Also, make sure you keep
any foreign objects out of the plug. This can cause
electrical shock, short circuit, or failure.
WARNING
Make sure to use the specified AC adaptor.
No screen backlight
120
Slide in the direction
indicated with the arrow.
Plug
DC IN jack
(page 66)
Summary of Contents for DTX-PRO
