DTX400 Series Firmware Update Guide 1
DTX400 Series
Firmware Update Guide
Thank you for choosing a Yamaha product.
This document explains how to update the firmware of the DTX400K/430K/450K Drum Trigger Module
(hereinafter called "DTX400"), and provides the update history.
■
Special Notices
・
This updater is designed for use with the DTX400, earlier than version 1.11.
・
This updater is to be used at the user’s own risk.
・
A computer running one of the following operating systems is required for this update:
Windows7 32bit/64bit
、
Windows8.1 32bit/64bit
、
Windows 10 32bit/64bit
・
The update will take several minutes. Please ensure that your computer does not enter Sleep mode
during this time.
・
During the update, do not launch or operate any applications other than the updater on your computer.
・
DO NOT power off or disconnect the cable from the product during the updating process. The DTX400
may become inoperable.
・
If the update fails, and the DTX400 still does not operate correctly even after you execute the update
once again, please contact your Yamaha dealer.
・
The company names and product names in this document are the trademarks or registered trademarks
of their respective companies.
EN
