Transferring Song Files
5
DTX400K/DTX430K/DTX450K MIDI Reference
8.
Select the song files to be transferred from the list of temporarily stored files in the top half of the
main window, and then click the Move button.
You will be asked to confirm if you wish to proceed. Clicking the Cancel button in this window will end the process without trans-
ferring any files.
9.
Click the OK button to transfer the selected files from the temporary storage area to your drum mod-
ule.
10.
Close the main window to shut down
Musicsoft Downloader
.
11.
Confirm that the song data has been correctly transferred to your drum module.
Select a transferred song on your drum module and start playback. Details on how to play a song can be found in the
Performing
with a Song
section of your DTX400K, DTX430K, or DTX450K Owner’s Manual.
NOTICE
Do not disconnect the USB cable while files are being transferred. In addition, the drum module should not be operated at this
time. Failure to avoid these precautions can not only prevent transferred song data from being saved correctly, but in certain
cases, could also lead to the entire drum-module memory being deleted.
NOTE
Musicsoft Downloader
must be shut down in order to confirm that song data has been correctly transferred.
