Advanced Techniques
DTX400K/DTX430K/DTX450K Owner’s Manual
40
Setting Parameters using Menu Mode
Menu Mode is used to set drum-module parameters and functions, which are arranged into the follow-
ing seven groups.
The basic procedure used to activate Menu Mode and select
the parameter to be set is as follows. For details of the indi-
vidual parameters, please see the corresponding sections
below.
1.
While holding the
[KIT]
but-
ton, press the
[SONG]
button
to activate Menu Mode.
Number buttons
[1]
to
[7]
will start to flash.
2.
Press the number button corresponding to the group
containing the parameter you wish to set. (Parameter
groups are shown in the hierarchical list on the left.)
3.
Press the number button corresponding to the parameter
you wish to set. (Parameters are shown in the hierarchi-
cal list on the left.)
4.
Enter the new setting.
You can use the number buttons to directly set parame-
ters with numerical values, such as a velocity. To enter
the value 105, for example, press the number buttons in
the order
[1]
[10/0]
[5]
.
•
Number button
[10/0]
is used to enter the value zero.
You cannot use it to enter the number ten.
•
When you have entered a value, the number buttons
will flash continuously to indicate the new setting.
z
Metronome Settings
1-1. Pattern ............................................................ Page 41
1-2. Beats .............................................................. Page 41
1-3. Sound............................................................. Page 41
1-4. Number Button Lighting Pattern ..................... Page 42
x
Kit Settings
2-1. Pad Sound...................................................... Page 42
2-2. Pad Volume.................................................... Page 42
2-3. Pad Panning .................................................. Page 43
2-4. Double Bass Drum......................................... Page 43
2-5. Reverb ........................................................... Page 43
c
MIDI Settings
3-1. Local Control .................................................. Page 44
3-2. Note Number ................................................. Page 44
v
Hi-hat Settings
4-1. Clutch Position................................................ Page 45
4-2. Splash Sensitivity........................................... Page 45
4-3. Foot Close Position ........................................ Page 45
4-4. Foot Close Velocity ........................................ Page 45
4-5. Kick Velocity................................................... Page 46
b
Trigger Settings
5-1. Pad Velocity Curve ......................................... Page 46
5-2. Crosstalk ........................................................ Page 47
5-3. Snare Pad Type ............................................. Page 48
5-4. Pedal Types ................................................... Page 48
5-5. Gain ............................................................... Page 49
5-6. Minimum Level............................................... Page 49
n
Training Settings
6-1. Timer .............................................................. Page 49
6-2. Difficulty Level ................................................ Page 50
6-3. Ignore Timing ................................................. Page 50
6-4. Groove Tracker Return Time .......................... Page 50
6-5. Groove Tracker Control Pad(s)....................... Page 51
6-6. Groove Tracker Advance Step ....................... Page 51
6-7. Pad Gate Group.............................................. Page 52
6-8. Fast Blast Timer............................................. Page 52
m
Other Settings
7-1. Kit Lock ........................................................... Page 53
7-2. Voice Guidance Volume ................................. Page 53
7-3. Auto Power-Off Time....................................... Page 53
7-4. Stereo/Mono................................................... Page 53
7-5. Initialize Kit ..................................................... Page 54
7-6. Initialize Song ................................................. Page 54
7-7. Revert to Last Power On ................................. Page 55
7-8. Factory Set ..................................................... Page 55
Basic Menu Mode Procedure
You can also use the [TEMPO+] and [TEMPO–] buttons to
increase and decrease setting values. Specifically, the
[TEMPO+] button increases the current setting by one each
time it is pressed; the [TEMPO–] button decreases it by one.
Hold
Number
button
Group
[1]
Metronome
Settings
[2]
Kit Settings
[3]
MIDI Settings
[4]
Hi-hat Settings
[5]
Trigger Settings
[6]
Training Settings
[7]
Other Settings
Number
button
Group
NOTE
Advanced Techniques