Advanced Techniques
41
DTX402K DTX432K DTX452K Owner’s Manual
Setting Parameters using Menu Mode
Menu Mode is used to set drum-module parameters and functions, which are arranged into the follow-
ing seven groups.
1.
Hold down the
Mode switch
to turn the “PLAY” and
“TRAINING” on (Menu Mode).
2.
Press the
number button
corresponding to the group
containing the parameter you wish to set. (Parameter
groups are shown in the hierarchical list on the left.) To
select “1-2. Beats,” for example, press the
number but-
tons
in the order
[1]
[2]
.
•
When the setting value is less than 10
The number button of the current setting will be fully lit
and the selectable number buttons will be half-lit.
•
When the setting value is more than 10
The number buttons flash continuously to indicate the
current setting. For example, when the current setting is
40, the number button lights will flash [4]
[10].
3.
Enter the new setting.
•
When the setting value is less than 10
Select a new setting using the corresponding
number
button
.
•
When the setting value is more than 10
Press the
TEMPO[+]/[–] button
to increase and
decrease the setting values. If you take no action for a
while, the setting is automatically stored.
z
Metronome Settings
1-1. Pattern ............................................................ Page 42
1-2. Beats .............................................................. Page 42
1-3. Sound............................................................. Page 42
1-4. Number Button Lighting Pattern ..................... Page 43
x
Kit Settings
2-1. Pad Sound...................................................... Page 43
2-2. Pad Volume.................................................... Page 43
2-3. Pad Tuning ..................................................... Page 44
2-4. Double Bass Drum......................................... Page 44
2-5. Reverb ........................................................... Page 44
c
MIDI Settings
3-1. Local Control .................................................. Page 45
3-2. Note Number ................................................. Page 45
v
Hi-hat Settings
4-1. Clutch Position................................................ Page 46
4-2. Splash Sensitivity........................................... Page 46
4-3. Foot Close Position ........................................ Page 46
4-4. Foot Close Velocity ........................................ Page 47
4-5. Kick Velocity................................................... Page 47
b
Trigger Settings
5-1. Pad Velocity Curve ......................................... Page 48
5-2. Crosstalk ........................................................ Page 49
5-3. Snare Pad Type ............................................. Page 49
5-4. Pedal Type ..................................................... Page 50
5-5. Gain ............................................................... Page 50
5-6. Minimum Level............................................... Page 50
n
Training Settings
6-1. Timer .............................................................. Page 51
6-2. Difficulty Level ................................................ Page 51
6-3. Ignore Timing ................................................. Page 51
6-4. Rhythm Gate Indicator Flipped ...................... Page 52
6-5. Dynamic Gate Low Limit ................................ Page 52
6-6. Dynamic Gate High Limit ............................... Page 52
6-7. Fast Blast Timer.............................................. Page 53
m
Other Settings
7-1. Voice Guidance Volume.................................. Page 53
7-2. Operation Sound Volume ............................... Page 53
7-3. USB Audio Output Settings ............................ Page 54
7-4. USB Audio Output Gain ................................. Page 54
7-5. Auto Power-Off Time....................................... Page 54
7-6. Stereo/Mono................................................... Page 55
7-7. Initialize Kit...................................................... Page 55
7-8. Delete Song.................................................... Page 55
7-9. Revert to Last Power On ................................ Page 56
7-10. Factory Reset ............................................... Page 56
Basic Menu Mode Procedure
When the setting value is more than 10, you can also use the
number buttons to directly set parameters with numerical val-
ues. To enter the value 105, for example, press the number
buttons in the order [1]
[10]
[5]. [10] is used to enter the
value zero. You cannot use [10] to enter the number ten.
Selectable Settings
Current Setting
NOTE
Advanced Techniques
