12
ELECTRONIC DRUM RACK Owner’s Manual
4.
Attach the snare holder to the snare clamp.
4-1.
Loosen the bolt on the snare clamp.
4-2.
Insert the snare holder.
4-3.
Securely tighten the bolt on the snare clamp.
The rack is unstable even though placed on a level surface.
Check whether the arrow stickers are lined up with the slits in the clamps. (See Step 4 and Step 8 of
on pages 7 and 8, respectively.) If they are not, loosen each of the clamp bolts,
adjust the arms to align the arrow stickers with the slits, and then retighten the bolts.
CAUTION
Take special care with the snare holder as the rod has a sharp tip that could cause injury.
Your electronic drum rack is now ready. For instructions on assembling the pads and the drum trig-
ger module, please refer to the Assembly Manual that came with this electronic drum kit.
Troubleshooting
Specifications
Weight: 8.6 kg
*: The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the
Yamaha website then download the manual file. Since specifications, equipment or separately sold accessories may not be the
same in every locale, please check with your Yamaha dealer.
Bolt
Snare clamp
Snare holder
