DTX700 O
w
ner’s Man
u
al
13
Setup
Setting Up for Sound
1
Ensure that your DTX700 is turned off (i.e.,
the screen is not lit).
2
Insert the power adaptor’s DC plug into the
[
] connector on the rear
panel.
3
Hook the power adaptor’s cord around the
cord clip to secure it in place.
4
Plug the power adaptor’s AC power cord into
an AC wall socket or another electrical outlet.
Your DTX700 does not come with built-in speakers. In order to
hear it, therefore, you will need to connect headphones or a
DTX-series monitor system, such as the MS40DR.
Connecting Speakers
Connect your speakers to the OUTPUT [L/MONO] and [R]
jacks (standard mono-audio).
Connecting Headphones
Connect your headphones to the [PHONES] jack (standard
stereo-audio). The [PHONES] knob on the control panel can
be used to adjust the volume of the headphones.
You can connect a portable music player or another similar
source of audio to your DTX700 via the [AUX IN] (auxiliary
input) stereo mini-jack. This makes it possible to play along
with your favorite songs.
NOTICE
• Whenever connecting other devices, ensure that the
cables you use have plugs that match the input or out-
put connectors on those devices.
• Before making connections, furthermore, you should
also turn the volume on the other devices fully down.
• When all connections have been made, use each
device’s volume controller to balance its output with
that of the DTX700.
Connecting the Adaptor
CAUTION
• Excessive bending can damage the power adap-
tor’s cord and create a fire hazard. Ensure, there-
fore, that the power cord is not bent at an extreme
angle when wrapped around the clip.
WARNING
• Use only the power adaptor that came with your
DTX700.
CAUTION
• The DTX700 remains charged and draws a small
amount of power even when the
(Standby/On)
button is set to the Standby position. For this rea-
son, you should always unplug the power adaptor
from the wall socket if the instrument will not be
used for an extended period of time.
Cord clip
Po
w
er adaptor cord
Connecting Speakers or Headphones
CAUTION
• To prevent hearing loss, avoid using headphones at
high volumes for extended periods of time.
Connecting a Music Player
Speakers
w
ith
a
bu
ilt-in amplifier
External MIDI device
MIDI
OUT
Standard stereo-
a
u
dio jack (6.3-mm
dia.)
Mini stereo
a
u
dio ca
b
le
(3.5-mm dia.)
Mo
b
ile m
u
sic
player, etc.
Standard mono a
u
dio
ca
b
le (6.3-mm dia.)
MIDI
ca
b
le
MIDI
IN
Summary of Contents for DTX700
Page 62: ...62 DTX700 Owner s Manual...
