Basic Operation
32
DTX700 O
w
ner’s Man
u
al
Building Your Own Kit
7
When you have finished adjusting the sound,
press the [STORE] button.
If you do not wish to store your new setting, press the
[EXIT] button. The display will return to the previous page.
8
Press the dial to store your new setting.
NOTE
• Even if yo
u
have adj
u
sted a kit’s so
u
nds and stored yo
u
r
ne
w
settings, yo
u
can perform kit initialization (page 28)
at any time to restore the original ones.
As described below, you can easily configure your DTX700 to
produce a kick drum sound when you operate the hi-hat control-
ler (RHH135 or HH65) plugged into the [HI-HAT CONTROL]
trigger input jack. This convenient function provides support for
double bass drumming techniques.
1
Press the [KIT] button and turn the dial to
choose a kit.
2
Press the [INST] button and then press down
once on the pedal connected to the [
o
KICK/
!0
] trigger input jack.
The message “Kick” will be shown in the top right corner of
the display.
3
Hold down the [SHIFT] button and press the
[F2] (DBL BASS) button.
NOTE
• While this f
u
nction is ena
b
led, yo
u
w
ill
b
e
u
na
b
le to
u
se
the hi-hat controller pl
u
gged into the [HI-HAT CON-
TROL] trigger inp
u
t jack to sim
u
late opening and closing
of the hi-hat.
1
Using a computer, place the audio files you
wish to import on a USB memory device.
NOTE
• Be s
u
re to place the a
u
dio files in the USB memory
device’s root directory (that is, not
w
ithin any folder).
• Yo
u
r DTX700 can import WAV and AIFF a
u
dio files.
• Only 16-
b
it a
u
dio files can
b
e
u
sed
w
ith yo
u
r DTX700.
• If the a
u
dio files yo
u
w
ish to
u
se have
b
een recorded
w
ith a different
b
it depth, please convert them to 16-
b
it in
advance
u
sing, for example, the
bu
ndled DAW soft
w
are.
For details regarding the conversion method, please
refer to the instr
u
ction man
u
al that came
w
ith yo
u
r soft-
w
are.
• Yo
u
r DTX700 can import a
u
dio files of
u
p to approxi-
mately 23 seconds in length (in the case of 44.1-kHz, 16-
b
it a
u
dio).
• Even
w
hen the a
b
ove conditions have
b
een satisfied,
certain other factors may make a
u
dio files incompati
b
le
w
ith the DTX700.
2
Unplug the USB memory device from your
computer and plug it into the [USB TO
DEVICE] port on the DTX700.
3
Press the [KIT] button.
4
Turn the dial to choose the kit you wish to
edit.
5
Press the [INST] button.
Playing with a Double Bass Drum
Importing & Assigning Audio Files
USB memory device
Summary of Contents for DTX700
Page 62: ...62 DTX700 Owner s Manual...
