DTX700 Reference Manual
44
TRIGGER
This section provides a description of the Menu
area’s Trigger pages. The characteristics of the trig-
ger signals output from pads when they are played
depend on a range of different pad design factors.
The Trigger pages allow you to optimize each pad’s
trigger signals for processing by the DTX700 and to
save your settings as trigger setup data.
: The current trigger setup number is reduced by 1.
: The current trigger setup number is increased by 1.
NOTE
•
If you hold down the [SHIFT] button and press the [F1] or [F2]
button, the current trigger setup number will be reduced or
increased in units of 10.
•
See
for details regarding cursor operations on Menu
area pages.
List of Functions
TRIGGER/NAME
Trigger Setup Name (Name)
From the Trigger Setup Name (Name) page, you can assign a
name of up to 12 characters in length to the current trigger setup.
Move the cursor within the name field using the [F1] and [F3]
buttons and select a character for that position by turning the dial
or pressing the [-/DEC] and [+/INC] buttons. The following char-
acters can be used.
NOTE
•
If you hold down the [SHIFT] button and press the [F1] or [F3]
button, the cursor will move to the start or end of the trigger
setup name field.
•
If you hold down the [SHIFT] button and press the [-/DEC] or
[+/INC] button, or alternatively, hold down the [SHIFT] button
and turn the dial, the cursor will jump between the “
”, “0”, “A”,
“a”, and “~” characters.
PadType
Gain
RejectTime
MinLevel
MaxLevel
MinVelocity
MaxVelocity
WaitTime
Head/Bow
OpenEdgeOffset
CloseCupOffset
Sensitivity
Head/Bow
OpenEdge
CloseCup
NoiseFltrTbl
For naming trigger setups
TRIGGER/NAME
