Setup
14
DTX700 O
w
ner’s Man
u
al
Setting Up for Sound
1
Turn the [MASTER] knob fully counterclock-
wise to minimize the output volume.
2
Press the
(Standby/On) button.
The opening pages will be displayed, followed by the Kit
page.
3
If you have connected any amplified speakers
or other similar external devices, turn them
on now.
NOTE
• When po
w
ering do
w
n yo
u
r system,
b
e s
u
re to t
u
rn off
external devices
b
efore the DTX700.
1
Press the
(Standby/On) button.
The display will turn off.
NOTICE
• If you turn off the DTX700 without storing any
changes you have made to settings, those changes
will be lost. For details on how to store changed set-
tings, see page 21.
If no controls are operated or no data is exchanged with external
devices (such as a computer or MIDI instrument) for a predeter-
mined length of time, your DTX700 will turn off automatically.
This function is called Auto Power-Off.
NOTICE
• If you do not store changed settings before the Auto
Power-Off function activates, your changes may be per-
manently lost. Be sure, therefore, to store new settings
whenever you are happy with them.
Setting the Auto Power-Off Function
Use the following procedure to set the time until the Auto
Power-Off function activates or to disable the function.
1
Press the [MENU] button.
2
Turn the dial to move the cursor to “Utility”.
3
Press the dial.
4
Turn the dial to move the cursor to “General”.
5
Press the dial.
6
Turn the dial to move the cursor to the “Auto-
PowerOff” row of the displayed list.
Turning On
Turning Off
Auto Power-Off
Summary of Contents for DTX700
Page 62: ...62 DTX700 Owner s Manual...
