Basic Operation
50
DTX700 O
w
ner’s Man
u
al
Integrating Accessories
As described below, you can attach various accessories* to your
DTX700 for an even more enjoyable playing experience.
(*: Sold separately)
If you own an HH65 Hi-hat Controller (sold separately), you
can connect it to your DTX700’s [
!2
HH-KICK] trigger input
jack in order to play kick drum sounds. To do so, proceed as fol-
lows.
1
Turn off your DTX700.
The HH65 Hi-hat Controller must be connected with the
drum trigger module turned off.
2
Insert one end of the cable that came with
your HH65 into the hi-hat controller’s output
jack.
3
Insert the other end of the cable into you
DTX700’s [
!2
HH-KICK] trigger input jack.
4
Turn on your DTX700.
5
Select a kit and start to play.
The following describes how to expand your DTX700 with a
PCY135 Cymbal Pad (sold separately).
1
Mount your PCY135 Cymbal Pad on a cymbal
holder (sold separately) or the like and set it
up as part of your drum set.
2
Use the cable that came with your PCY135
Cymbal Pad to connect it to your DTX700. For
demonstration purposes, we will use jack
!1
.
3
Turn on your DTX700.
4
Hit the newly-added cymbal pad.
5
Select the most suitable pad type.
5-1
Press the [MENU] button.
5-2
Turn the dial to select “Trigger”, and then press the
dial.
5-3
Turn the dial to select “Pad”, and then press the dial.
5-4
Turn the dial to move the cursor to the “PadType” row
of the displayed list.
5-5
Press the dial to zoom in on the pad type. Turn the dial
to select “PCY135”, and then press the dial once
again.
Using an HH65 Hi-hat Controller
as Kick Drum Pedal
OUTPUT
Expanding with a PCY135 Cymbal
Pad
Summary of Contents for DTX700
Page 62: ...62 DTX700 Owner s Manual...
