background image

KIT

DTX700  Reference Manual

25

Using the following parameters, you can adjust the 
send level to be set for each of the effect units when 
the current kit is selected.

q

MIDI Channel (Ch)

Use this parameter to select the current MIDI channel number.

Settings:

1 to 16

Variation Send Level (VarSend(Dry))

Use this parameter to set the variation-effect send level to be sent 
whenever the current kit is selected.

Settings:

0 to 127

NOTE

If the above MIDI channel (Ch) is set to 10, this setting will be 
displayed as “---” and modification will not be possible.

Chorus Send Level (ChoSend)

Use this parameter to set the chorus send level to be sent when-
ever the current kit is selected.

Settings:

0 to 127

Reverb Send Level (RevSend)

Use this parameter to set the reverb send level to be sent when-
ever the current kit is selected.

Settings:

0 to 127

q

MIDI Channel (Ch)

Use this parameter to select the current MIDI channel number.

Settings:

1 to 16

Control Change Number (CC No)

Use this parameter to set the type of MIDI Control Change mes-
sage to be sent whenever the current kit is selected. No Control 
Change messages are sent when “off” is set.

Settings:

off, 1 to 95

Control Change Valve (CC Val)

Use this parameter to set a value for the MIDI Control Change 
message sent whenever the current kit is selected.

Settings:

0 to 127

NOTE

If the Transmit parameter (also from the Menu area’s Kit/MIDI/
Other page) has been set to “off” or “PC”, this setting will be 
displayed as “---” and modification will not be possible.

If the type of MIDI Control Change message set here matches 
one of the following Control Change message types (also set 
on the Menu area’s Kit/MIDI/Other page), this parameter’s set-
ting will have priority.

Volume, Pan, VarSend(Dry), ChoSend, and RevSend

KIT/MIDI/OTHER  3/4

q

KIT/MIDI/OTHER  4/4

q

Summary of Contents for DTX700






































































Reviews: