KIT
DTX700 Reference Manual
27
Reverb Send Level (RevSend)
Use this parameter to set the reverb-send level for the current kit.
Settings:
0 to 127
Reverb Return Level (RevReturn)
Use this parameter to set the level of the return signal from the
reverb effect.
Settings:
0 to 127
Reverb Panorama (RevPan)
Use this parameter to set the stereo panning of the reverb effect’s
return signal.
Settings:
L63 to C to R63
Variation Category (Category)
Use this parameter to select a variation-effect category.
Settings:
Refer to the
Data List
document.
Variation Type (Type)
Use this parameter to select a variation-effect type.
Settings:
Refer to the
Data List
document.
NOTE
•
If the Type parameter is set to “No Effect”, no other panels will
be displayed for this page.
Chorus Type (Type)
Use this parameter to select a chorus-effect type.
Settings:
Refer to the
Data List
document.
NOTE
•
If the Type parameter is set to “No Effect”, no other panels will
be displayed for this page.
Reverb Type (Type)
Use this parameter to select a reverb-effect type.
Settings:
Refer to the
Data List
document.
NOTE
•
If the Type parameter is set to “No Effect”, no other panels will
be displayed for this page.
KIT/EFFECT/MIXER 3/3
KIT/EFFECT/VARIATION 1/3
KIT/EFFECT/CHORUS 1/5
KIT/EFFECT/REVERB 1/4
