DTX700 Reference Manual
33
SONG
: The current song number is reduced by 1.
: The current song number is increased by 1.
NOTE
•
If you hold down the [SHIFT] button and press the [F1] or [F2]
button, the song number will be reduced or increased in units
of 10.
•
See
for details regarding cursor operations on Menu
area pages.
List of Functions
SONG/COMMON
Loop
When this parameter is set to “on”, playback of the song will start
again from the beginning whenever it finishes (i.e., looped play-
back). When set to “off”, the song will be played once to the end
and will then stop (i.e., one-shot playback).
Settings:
off, on
Tempo
Use this parameter to set a tempo for playback of the selected
song.
Settings:
30 to 300
NOTE
•
When a song is assigned to a kit, the kit’s tempo
will take priority over this setting.
Song Name (Name)
Use this parameter to set a name for the current song. A name of
up to 10 characters in length can be assigned.
Setting a Song Name
1.
Press the dial to call up the song naming page.
2.
Move the cursor within the name field using the [F1] and
[F3] buttons and select a character for that position by
turning the dial or pressing the [-/DEC] and [+/INC] but-
tons. The following characters can be used.
NOTE
•
If you hold down the [SHIFT] button and press the [F1]
or [F3] button, the cursor will move to the start or end of
the song name field.
•
If you hold down the [SHIFT] button and press the [-/
DEC] or [+/INC] button, or alternatively, hold down the
[SHIFT] button and turn the dial, the cursor will jump
between the “
”, “0”, “A”, “a”, and “~” characters.
Transmit
Volume
Pan
MSB
LSB
PC
VarSend(Dry)
ChoSend
RevSend
For settings affecting all songs
SONG/COMMON
