UTILITY
DTX700 Reference Manual
40
UTILITY/PAD
The parameters from the Menu area’s Utility/Pad page
can be used to assign functions to pads and foot-
switches.
PAD
Press this button to open a popup window for selecting the pad to
be set. You can also strike a pad to select it.
AUDITION
By pressing the [F3] button (AUDITION), you can play the
sound assigned to the selected pad without actually striking it.
This can prove highly useful when you need to listen to the
assigned sound while making settings.
Pad Function (PadFunc)
Use this parameter to specify a function (such as kit, song, or
tempo selection) to be performed instead of playing a sound
when the current pad is struck. Note that you can strike a pad or
select it using the [F1] button (PAD) to make it the current pad.
Settings:
off, inc kitNo, dec kitNo, inc songNo, dec songNo, inc
tempo, dec tempo, tap tempo, clickOn/Off, effectOn/Off,
CC01 to CC95
Control-Change Send Channel (CC Ch)
Use this parameter to set a MIDI channel for sending the MIDI
Control Change message selected using the PadFunc (Pad Func-
tion) parameter.
Settings:
1 to 16
Control Change Value (CC Val)
Use this parameter to set a value for the MIDI Control Change
message selected using the PadFunc (Pad Function) parameter.
Settings:
0 to 127
Foot Closed Position (FootClosePos)
Use this parameter to adjust the position at which the hi-hat
switches from open to closed when the hi-hat controller is oper-
ated. The lower the value, the smaller the virtual opening between
the top and bottom hi-hats.
Settings:
-32 to +0 to +32
Splash Sensitivity (FootSplashSens)
Use this parameter to set the degree of sensitivity for detecting hi-
hat foot splashes. The higher the value, the easier it will be to pro-
duce a foot-splash sound with a hi-hat controller. High values
may, however, result in splash sounds being unintentionally pro-
duced when, for example, you depress the hi-hat controller lightly
as you keep time. It is a good idea to set this parameter to “off” if
you do not want to play foot splashes.
Settings:
off, 1 to 127
HH-Kick Velocity Sensitivity (HH-KickVelSens)
Use this parameter to set the sensitivity of the DTX700 to opera-
tion of the foot controller connected via the [
!2
HH-KICK] trig-
ger input jack. The larger the setting, the louder the sound
produced when the controller is lightly depressed.
Settings:
0 to 127
CymbalChokeRate
Use this parameter to specify how quickly the cymbal sound is to
decay when the choking or muting technique is used. The larger
the value, the faster the sound will decay.
Settings:
-20 to +0 to +20
For pad-related settings
UTILITY/PAD 1/2
off
Sounds will be produced in the normal way.
inc kitNo
The kit number will be increased by 1.
dec kitNo
The kit number will be decreased by 1.
inc songNo
The song number will be increased by 1.
dec songNo
The song number will be decreased by 1.
inc tempo
The tempo will be increased by 1 bpm.
dec tempo
The tempo will be decreased by 1 bpm.
tap tempo
The pad or footswitch can be used to tap the
tempo.
clickOn/Off
The click track will be toggled on or off.
effectOn/Off
The effects will be toggled on or off.
CC01 to CC95
A MIDI Control Change message of the corre-
sponding number will be sent to the DTX700’s
internal tone generator and connected MIDI
devices.
UTILITY/PAD 2/2