Yamaha DTX900 Owner'S Manual Download

Page: 75 / 164

Basic Structure of the DTX900

Reference

DTX900 Owner’s Manual

um Kit mode

Ref

erence

Song mode

Clic

k mode

igger mode

File mode

Utility mode

Chain mode

Sampling mode

DelayC

Determines the delay time for the center channel.

DelayL

Determines the delay time for the L channel.

DelayL>R

Determines the amount of time between the moment
the sound is input from the L channel and the
moment the sound is output to the R channel.

DelayOfstR

Determines the delay time for the R channel as off-
set.

DelayR

Determines the delay time for the R channel.

DelayR>L

Determines the amount of time between the moment
the sound is input from the R channel and the
moment the sound is output to the L channel.

Density

[For REVERB effects, except EARLY REFLECTION]
Determines the density of the reverberations.
[For EARLY REFLECTION]
Determines the density of the reflections.

Depth

[For FLANGER]
Determines the amplitude of the LFO wave which
controls the cyclic change of the delay modulation.
[For PHASER MONO, PHASER STEREO]
Determines the amplitude of the LFO wave which
controls the cyclic change of the phase modulation.
[For SPACE SIMULATOR]
Determines the depth of the simulated room.

Detune

Determines the amount of detuning of the pitch.

Device

Selects the device for changing how the sound is to
be distorted.

Diffuse

[For TEMPO PHASER, EARLY REFLECTION]
Determines the spread of the selected effect.
[For REVERB effects, except EARLY REFLECTION]
Determines the spread of the reverb.

Directn

Determines the direction of the modulation controlled
by the envelope follower.

Div.Lvl

Determines the minimum level of the portions
extracted via the slice effect.

DivFreqH

Determines the high frequency for dividing the entire
sound into three bands.

DivFreqL

Determines the low frequency for dividing the entire
sound into three bands.

DivideType

Determines how the sound (wave) is sliced by the
note length. This helps in setting rhythmic effects that
match the timing of the music.

DlyLvl

Determines the level of the delayed sound.

DlyLvlC

Determines the level of the delayed sound for the
center channel.

DlyMix

Determines the mixing level of the delayed sound.

DlyOfst

Determines the offset value of the delay modulation.

DlyTrnsit

Determines the speed (rate) at which the delay time
is changed from the current value to the specified
new value.

Drive

[For HARMONIC ENHANCER, TALKING MODULA-
TOR]
Determines the extent to which the enhancer or talk-
ing modulator is applied.
[For NOISY, SLICE]
Determines the degree and character of the distor-
tion effect.

DriveHorn

Determines the depth of the modulation generated
via the rotation of the horn.

DriveRotor

Determines the depth of the modulation generated
via the rotation of the rotor.

Dry/Wet

Determines the balance of the dry sound and effect
sound.

DryLPF

Determines the cutoff frequency of the low pass filter
applied to the dry sound.

DryLvl

Determines the level of the dry sound (the unproc-
essed sound).

DryMixLvl

Determines the level of the dry sound (the unproc-
essed sound).

DrySndNoise

Determines the level of the dry signal sent to the
noise effect.

Paramater

name

Descriptions

DyLvlOfs

Determines the offset value added to the output from
the envelope follower.

DyThreshLvl

Determines the minimum level at which the envelope.
follower starts.

Edge

Sets the curve that determines how the sound is dis-
torted.

Emphasi

Determines the change of the characteristics in high
frequencies.

EQ1Freq

Determines the Cutoff frequency of EQ1 (Low Shelv-
ing).

EQ1Gain

Determines the level gain of EQ 1 (Low Shelving).

EQ2Freq

Determines the center frequency of EQ2.

EQ2Gain

Determines the level gain of EQ2.

EQ2Q

Determines the Q of EQ2.

EQ3Freq

Determines the center frequency of EQ3.

EQ3Gain

Determines the level gain of EQ3.

EQ3Q

Determines the Q of EQ3.

EQ4Freq

Determines the center frequency of EQ4.

EQ4Gain

Determines the level gain of EQ4.

EQ4Q

Determines the Q of EQ4.

EQ5Freq

Determines the Cutoff frequency of EQ5 (High
Shelving).

EQ5Gain

Determines the level gain of EQ5 (High Shelving).

EQFreq

Determines the center frequency for each band of
the EQ.

EQGain

Determines the level gain of the EQ center frequency
for each band.

EQWidth

Determines the width of the EQ band.

ER/Rev

Determines the level balance of the early reflection
and reverb sound.

F/RDpth

This Auto Pan parameter (available when PAN Direc-
tion is set to “L turn” and “R turn”) determines the
depth of the F/R (front/rear) pan.

FBHiDmp

Determines how the high frequencies of the feedback
sound decay.

FBHiDmR

Determines the amount of decay in high frequencies
for the R channel as offset.

FBLevel

[For CHORUS effects, DELAY effects, TECH effects,
CLASSIC FLANGER, TEMPO FLANGER, DYNAMIC
FLANGER, COMP DISTORTION DELAY]
Determines the feedback level output from the delay
and returned to the input.
[For TEMPO PHASER, DYNAMIC PHASER]
Determines the feedback level output from the delay
and returned to the input.
[For REVERB effects]
Determines the feedback level of the initial delay.

FBLvl1

Determines the feedback level of the delayed sound
in the 1st series.

FBLvl2

Determines the feedback level of the delayed sound
in the 2nd series.

FBLvlR

Determines the feedback level for the R channel as
offset.

FBTime

Determines the delay time of the feedback.

FBTime1

Determines the delay time of feedback 1.

FBTime2

Determines the delay time of feedback 2.